Boob it yourself?

[Ranee Daze]

I have made boobs from:
Nylons full of popcorn or red lentils.
Ballons full of water.
Ziplocks full of that blue stuff from coldpacks.
Balloons full of J-E-L-L-O
ziplocks full of the absorbant fiber-gel inside diapers and "Depends"
All were pretty successful, but the popcorn in a mastectomy bra works the best.

Any other ideas out there?

[Scotty]

Tube socks?

[Karren H]

I have my nylon filled with sine bird seed for cleavage and low cut tops.....http://pg.photos.yahoo.com/ph/karrenhutton/detail?.dir=635c&.dnm=3f99.jpg&.src=ph

But nothing beats silicone breast forms for realizm.....

Love Karren

[Julie York]

There's a prog on television here recently called Mythbusters. They use some geletine stuff they call Ballistics gel. That could be interesting. Looks like jelly (jello).

[Karren H]

There's a prog on television here recently called Mythbusters. They use some geletine stuff they call Ballistics gel. That could be interesting. Looks like jelly (jello).

Yeah...love that show. But as they say.....they are professionals with years of experience....so don't try this at home!!!! hehehehe BOOOOOMMMMM!!!!

Love Karren

[KathlyLC]

Less than 20 bucks willget a quart of the platisol that the artificial worms and lures for fishing is ade form. It comes in a few different hardness grades. The soft grade is about like a real high quality from would be made from, and it easily contours to most any bra cup, but its a mess to work with but once done the end results are well worth it. I use a bra that I coat the insides of the cups with parafinn to sort of seal it up and make it slicker, but its not reallay necessary. Choose a full cup bra,. then stretch it out so the cups are supported over coffee cans or other containers. Put the liquid plastisol in a pan and heat it to the recomended temp. You can tint it with dye that they sell for tinting or use pressed powder. Pressed powder works fine, but go sparingly as it only takes a littlebit to change color........Pour bra cups full. Allow to chill and setup. It takes a while to chill and get to rom temp so do not rush it....And I mean an hour or two or more and thats for a b or C sized cup.......Once cured remove form from bra, while running it under cool tap water, then rinse well in warm soapy water to remove any adhered parafin wax. The bra can be washed in hot water and detergent and it will remove the wax....The forms can be fine tuned (trimmed) if necessary with a sharp scissors or razor type knife while holding them under water, as the platisol wants to hold on tothre blade so cutting without a form of lube (Water) makes it hard to do.....Dry em off, dust with talc powder and use em. Dust with talc (baby powder) for awhile and it will absorb any small spots that may still be a tad bit sticky if the mix was not mixed up right when yu heated it. In time those sticky areas will go away if you dust with baby powder. You can make nipples if desired with another mold, and use a hot knife and melt the nipple to the form. Touch form in the are yu want nipple attched with a hot knife, touch nipple to hot nife, slip nife out and press nipple to breast form, allow to cool, and nipple is firmly attached.

Do an online search for Plastisol or Plastic Fishing worm and lure making. Yu may even find it in larger sporting good stores. I have made forms out of this stuff similar as to how they make a ceramic piece. Just allow a shell thickness of it to build up, in mold and then pour off inner most liquid. I make a flat piece oabout 1/4" thick of the same material in a flat tray.......ONce both parts are able to be handled, use the hot knife method to adhere hollowed breast form to the flat piece. Seal all the way around. Once sealed , you can use a large hypodermic syringe such as sold for injecting marinades etc into turkets andmeats etc, and use the liquid form freezer packs etc to fill the forms hollow, and then touch up the injection site with tip of hot knife. Makes for some really soft and formable breasts forms that have lots of bounce and jiggle, much better than the solid plastisol forms.

There is lots of different latex proudcts for stage and art work out there such as dragon skin or dragon kote etc, but thye are all kind of pricey to play with., With plastisol if it does not come out right, toss it back in the pan and remelt it and do it again. Heck if yur not chloosey aout colors, yu could even cobble up some flourescent green or sparkly blue falsies, by buying packs of the worms or lures and remelting them.....If you buy any and all kinds of colors it will come out a dark brown black color when mixed, but in a bra it is covered so if mailorder is not an option its still a way to buy the stuff in the form of artifical worms and remelt them into forms.....Just do not buy any scented worms, unless you rather smell like a fish lure. The normal smell of platisol will go away with baby poweder and a weeks time or so.

[Ellisia_Lynch]

I've considered doing something similar with silicone caulking from Home Depot.

[Julie York]

What are those Gummy Worms made from? The sweety candy things kids eat?


You could make some boobs out of that stuff and if you have a sugar attack you can eat your tits during the Tri-ess meeting!

"Don't mind me....sugar thing. No really....carry on."

[Dee 1062]

Rice in sandwich bags work well in side the bra, great for a little extra:)

[Jasmine Ellis]

What are those Gummy Worms made from? The sweety candy things kids eat?


You could make some boobs out of that stuff and if you have a sugar attack you can eat your tits during the Tri-ess meeting!

"Don't mind me....sugar thing. No really....carry on."


:lol2: :lol2: :lol2: :lol2: :lol2:

[RikkiOfLA]

All this talk about forms made of candy, in fluorescent colors, and so on!

:lol2: :lol2: :lol2: :lol2: :lol2:

How about Jello forms? Edible, bright colors (to match your dress, if you like), plus fruity colors!

And if you're feeling kinky, throw a can of fruit cocktail in the Jello when you make it!

Giggle,
Rikki