Originally Posted by
divamissz
I've always had "moobs" so I have something to start with. People talk about using "medical tape" but there's a lot of different types. What you need is 3M Transpore-a clear plastic tape that's easy to tear and sticks great. If you go to a medical supply house you can find it in widths from 1/2" to 3". I find that the 1" and 2" sizes are all you really need.
To create cleavage, tear off two strips of 1" tape long enough to go from one nipple to the other. Additionally, tear of a longer strip (this is where the 2" tape is handy, but 1" works too). Use alcohol or another astringent to wipe the skin around where you'll be applying the tape so it'll stick better. Now, take one strip and start from about three inches behind the nipple and apply the tape in a downward angle. It should be just under the nipple. With one hand, lift and pull the skin upward and to the center of your chest, and with the other pull the tape across and stick it to your body. Do the same to the other side, and you'll have gotten some cleavage. Take the third piece of tape and apply it over the other strips, using it as a "support" for the breasts you've made. Put on your bra and whatever padding you use to fill it out. Take some dark contour powder and brush it into the valley of your cleavage, upward and out onto the top of your breast on both sides. Use a highlight powder between the bra and the contour to make the breasts pop out.