Has any one made their own boobs? I've found what I think is a good try. I took a 3lb. coffee can and reshaped it to a kind of a tear drop shape. Next I heated up the rim using a hot frying pan. Then used it to make a container out of a ziplock lunch bag. The hot can rim will melt the bag and seam it,save a little of the ziplock by over lapping it with the rim. Next fill it with Mona Mounds formula. It works pretty good.
Sounds like hard work! You must be an engineer...
A lot of us use a pair of stockings stuffed with bird seed, or purchase pre-made silicone forms.
But, I guess you're going for the Madonna look
Last edited by Emily Anderson; 06-12-2008 at 05:03 PM. Reason: because I'm blind drunk, as usual
I'm an engineer and I opted for the bird seed... Easy and cheap and adjustable. Just don't go to the Avairy enfemme!! Lol. I still have them and use them when traveling and weight is a concern...
But nothing beats silicone... Imho...
[quote=Emily Anderson;1326444]
A lot of us use a pair of stockings stuffed with bird seed, or purchase pre-made silicone forms.
/quote]
Dittos and mine are still working for over two years.
I don't quite follow but it sounds very inventive.
Something that has always intrigued me is ballistic gell. It's supposed to be used for tests using guns to see how it effects a body. No-one has mentioned that yet. It's like firm jelly. It'd make great boobs.
What is Mona Mounds formula?
Ballistic gel starts to melt at body temp, I played with that stuff in college. However some very realistic SFX can be done using gelatin.Originally Posted by Julie York
I don't quite follow but it sounds very inventive.
Something that has always intrigued me is ballistic gell. It's supposed to be used for tests using guns to see how it effects a body. No-one has mentioned that yet. It's like firm jelly. It'd make great boobs.
What is Mona Mounds formula?
I have posted this before but a VERY SIMPLE solution is to buy a set of A/B NUBra and a set of C/D NuBra type self adhesive bras from WalMart . Put the smaller inside the larger one and the self adhesive will hold everything together. You end up with a very realistic silicon form for less than $50 !! Best of all, it's available in almost everyone's neighborhood.
Weight and shape are very close to an expensive silicone set of forms.
I just ball up a pair of tights and stuff into each cup, at least when I take them out I don't have to hide them from the wife, I am thinking of buying breast forms, but I think I will go for the Gel forms rather then silicon ones. Gel forms are a hell of a lot cheaper and will not leak like silicon.
Gel forms can be purchased from here
http://www.supergelproducts.com/index.html
Sophie Mosley
pantyhose rolled up and stuff in the cups
[SIGPIC][/SIGPIC]
I prefer the Gel filled breast. Use 2 - 4 teaspoons of baby diaper powder(disposable nappy gel) + 500 ml of tap water per side. Place 1 condom inside another and add gel to inner (The scientific name of this powder is sodium polyacrylate and when water is added, it turns into a gelatin-like substance).
Add water via funnel to inner and tie off. (Blowing up outer condom can help with placing the one condom inside the other). Tie off the outer condom and place the form inside a knee high stocking (gives extra protection against puncturing). Then kneed the breast well to mix the gel powder and water. This mix approximates a B' cup + makes a good nipple. Varying the amount of gel changes the consistency, i.e. firmness. For more instructions for making your own breast forms see the following sites.
Bloomburg Breast Forms FAQ - http://www.eskimo.com/~bloo/bformfaq/
http://www.geekbabe.com/annie/feature/forms/
http://www.trannyradio.com/gguide/boobs/boobs.htm
Please don't ask where I got this info. Several years ago I met a CD that told me he made his own breast forms. He explained the whole process. Then, not long ago I exchanged some mails with a dresser and he sent me this "formula". It is the same method. The breasts are quite realistic and have the heft and bounce of real breasts. I hope I don't get into trouble here for leaving the phone numbers in.
Go to your local artists supply shop and buy some modelers clay, also known as plasticene.
Shape this into the size and shape of breasts you want.
Next make a mold of your breasts by pouring artists molding material (Hydrocal) over your clay breast forms. When the Hydrocal has dried, carefully remove the molds from the clay breast forms. The breasts forms themselves are made from a material called Plastisol. It is also known as Hot Melt Vinyl or as Fishing Lure Compound. It is the same stuff that is used to make those squishy fishing lures and soft, wiggly children's worms. It simulates a breast quite well. Pour the very hot Plastisol into the breast molds and let cool for at least six hours.
Excellent booklets that will answer every question you can think of, on all aspects of moldmaking, casting, and where to obtain various supplies can be obtained from Castcraft, Box 17000, Memphis, TN 38187. Cost for these booklets was $39.00 several years ago. Probably a lot more now with higher oil prices. The Plastisol can be purchased from Pro Am Products. Cost $11.00 per quart or about $34.00 /gal. You should also consider getting a couple of 1/2 oz tubes of flesh colored pigment. (#17 in the pigment colors) Other Plastisol vendors are Hilts Molds, Jann's Sportsmans Supplies, Industrial Arts Supply Co. Most of these suppliers have catalogs, some free, some charge a dollar or two.
Last edited by Sharon; 06-12-2008 at 07:45 PM. Reason: removed phone numbers - either provide a web link or supply numbers by PM request
"It takes a real man to dress as a woman."
I luv my PALS. I bought them from the addy above and I am a very satisfied customer. Great selection nice price super service. huggzzz to all, bobbie
You used to be able to buy "Clone-A-Tit" kits at some adult novelty stores, but it's been several years since I've seen one, I'd say ten or fifteen years at least. If they still sell that crazy kit thing then you just need someone with a nice rack to copy.
I use water balloons. I choose white ones. I fill the balloons with hot water and stuff them into knee high stockings. This gives them a more natural color. I then came up with the crazy idea of using pencil erasers for nipples. I place them between the stockings and the balloon where an actual nipple would be located and it actually sticks out just like a nipple. It actually looks very good and natural and I always have the appearance of a nipple.
By the way, they bounce just like real breasts.
This is a cheap alternative to breast implants.
Another filler, one with a heavier weight is rice. I must say, it is tempting to improvise given the price of factory-made breast forms.
Ballistic gelatin? Sir Solly, the inventor, would roll over in his grave. But then he invented it with not much more than the home experiment and improvisation approach, and trial and error. Perhaps a little further experimentation could make a version capable of sustaining higher temperatures.
Last edited by Beth-Lock; 06-12-2008 at 10:53 PM. Reason: typo
I urge caution. There used to be a band called "The Teardrop Explodes!".
It would certainly break the ice at parties (along with a few other things!).
For those still in the closet, who can't afford the silicone breast forms on eBay or cannot buy them. My ten year old tried socks, but pantyhose are better.pantyhose rolled up and stuff in the cups
Some friends used those gel packs sold in drug stores that are supposed to be frozen and placed on injuries. Some people use shoulder pads removed from jackets.
how much bird sceid would i use to make a D cup?
i cut out the boobs off a blow up doll. i still do balloons, i can change my sise
can i go from prettieboyinneed to prettyboy
